Axsys Misc Parts
<--

The Trusted Authority in

-->

Meet the Next Generation of

Versamill Precision Dental Machining Centers

Read More Contact Us !

Introducing Versamill

 #

Our new SPEED Series of Precision Dental Mills share some of the most important features a high precision machine must provide to assure it is capable of reliably and consistantily producing the highest quality restorations with the minimum amount of profit-stealing and error prone post-machiing handwork. It's the life blood of your machine and a large part of the SPEED Series DNA.


Granite Machine Frame

Axsys Advantage: DNA Strand 1

All Versamill SPEED machines have granite-based machine frames. These frame possess greater stability and superior vibration damepening characteristics as compared to metal or cast frames.


Axsis Drive System

Axsys Advantage: DNA Strand 2

High-precicion CNC machines such as SPEED Versamill's utilize precision ballscrews in a closed-loop system powered by high-torque servo motors supported by absolute encoders. This system is superior and requires signifianly less machine calibration than lower-quality systems using stepper motors or servo motors with incremental encoders.


Spindle Drive

Axsys Advantage: DNA Strand 3

The spindle is the heart of any CNC machine and SPEED Versamil's utilize the best in the business. SPEED spindle drives are selected for consistant, high-torque over the useable rpm range. It is this aspect of a spindle that is more important than power rating. SPEED spindles are liquid cooled 3X hybrid bearings to maintain precision and longer life.


Machine Control

Axsys Advantage: DNA Strand 4

Effectieve high-speed machine control systems require high-block processing rates to keep up with the high-speeds required for dental applications. These controls should be built-in and provide access to the control API thereby allowing future expansion and automation. SPEED Machine controls are developed in the USA.

Products

Introducing the Versamill SPEED

 #
Assembled in the USA

All Versamill 3 Series machines are assembled in our Traverse City facility using foreign and domestic components. This includes the machine control which is developed in the USA.


Tested and Qualified

Versamill 3 Series machines are tested and fully qualified to assure accuracy and that they arrive fully ready for production. This includes perpendicularity between rotary axes which is critical in 5-axis manufacturing.


Your Choice of Colors

You can even select you choice of colors. Choose between Charcoal, Clinician Blue, and Sage Wisdom–whichever best suits your unique enviornment.


MANUAL LOAD

The AX 314 DW is a wet/dry processing machine that features an 16-position tool changer with tool management system.

The extreme stability of the AX 314 DW together with its high-torque spindle and servo motor driven drives enable the processing of virtually any prosthesis made of the vast choice of dental materials available today and tomorrow–all with fine detail and clean, thin restorative margins.

HIGHLIGHTS

AX 314 DW highlights include:

  • Liquid-cooled, high-torque, 1.370kW spindle
  • 3X hybrid-ceramic bearings
  • Standard 6.0mm tooling
  • Choice of hyperDENT or GO2cam software
  • Small footprint
  • Circular, mandrel, & C-clamp fixtures
  • Much more...
  •  #



    1.370kW

    80,000 rpm high-torque spindle

    CLOSED-LOOP

    Servo drives w/absolute encoders

    130kg

    WEIGHT WITH vibration-reducing granite base

    MANUAL LOAD

    The AX 305 D is a dry processing machine that features an 12-position tool changer with tool management system.

    The extreme stability of the AX 305 D together with its high-torque spindle and servo motor driven drives enable the processing of virtually any prosthesis made of the vast choice of dental materials available today and tomorrow–all with fine detail and clean, thin restorative margins.

    HIGHLIGHTS

    AX 305 D highlights include:

  • Liquid-cooled, high-torque, 0.5kW spindle
  • 3X hybrid-ceramic bearings
  • Standard 3mm tooling
  • Choice of hyperDENT or GO2cam software
  • Small footprint
  • Circular, mandrel, & C-clamp fixtures
  • Much more...



  • 0.5kW

    60,000 rpm high-torque spindle

    CLOSED-LOOP

    Servo drives w/absolute encoders

    100kg

    WEIGHT WITH vibration-reducing granite base

    Versamill SPEED 3 Specifications


     #

    The Benefits of Wet Milling Zirconia

    Contrary to claims to the contrary, there are many benefits to wet-machining zirconia. These benefits extend beyond the added expense and noise associated with the required filtration and vacuum systems required for dry milling applications. These vacuum and filtration systems, while removing a large amount of the caustic zirconia dust generated by the machining process, do not remove all of the dust- the balance of which becomes air born in the lab or dental office environment and creeps into machine components thereby compromising or shortening their operational lives.

    Zirconia sludge (the mixture of zirconia and water) is by far easier to deal with than dry zirconia dust, does not infiltrate machine components and is significantly less destructive to machine components than caustic and abrasive dry zirconia swarf (by-products of the machining process).

    Users not only enjoy longer machine and tool life, lower operating expense, and reduced system maintenance, but also realize the benefits of highly detailed and lustrous post-sinter units, superior surface finishes and sharp margins without extensive margin reinforcement- “do-overs" due to chipped or blown out margins are very rare and if present, usually attributed to worn tooling.

    We recommend washing/cleaning out the machining area, of any mill, machining any material, be done daily as part of a preventative maintenance program. It does not take very long and is not difficult to do. Flushing with a water hose works well. Use of compressed air should be done carefully with low pressure, especially with "dry" machines that do not have adequate sealing of the machining enclosure.

    Do this and the machine will reward you with smooth operation and longer, care-free life.



    Zirconia Drying Times
    Single (70°C)): 15 minutes+
    Single (140°C)): 5-10 minutes
    2-4 units (70 °C): 40 minutes+
    2-4 units (140°C): 25 minutes+
    5+ units (70°C): 50 minutes+
    5+ units (140°): 25 minutes+
    Specification Versamill 5X-300D Versamill 4X-100 Versamill 5X-200
    Travel Limits (X, Y Z Axis) 145 x 110 x 85 250 x 116 x 110 330 x 146 x 145
    Travel Limits (Rotary Axis) ±180° B-Axis, ±30° A-Axis 360° A-axis ±180° A-axis, ±30° B-axis
    Number of Axes 5 Simultaneous 4 Simultaneous 5 Simultaneous
    Accuracy ±10.0µm ±5.0µm ±5.0µm
    Repeatability ±5.0µm ±3.0µm ±3.0µm
    Automatic Tool Changer 12 Tools w/Tool Breakage Sensor 8 Tools w/Tool Breakage Sensor 15 Tools w/Tool Breakage Sensor
    Spindle 60,000, 0.5kW, Air Cooled 60,000 rpm, 1.4kW, Air Cooled 60,000 rpm, 3.0kW, Air Cooled
    Circular Material Block 98.3Ø Disc 98.3Ø Disc 98.3Ø Disc
    Machine Dimensions (W x L x H) 540mm x 580mm x 630mm (machine only) 623mm x 780mm x 1735mm 745mm x 830mm x 1765mm
    Installation Space (W x L x H) 1220mm x 900mm x 1800mm (w/optional table) 1100mm x 800mm x 2005mm 1220mm x 900mm x 2025mm
    Axis Drive System Stepper motors, ball screws w/anti-backlash ballnuts & linear guides Servo motors, ball screws w/anti-backlash ballnuts & linear guides Servo motors, ball screws w/anti-backlash ballnuts & linear guides
    Weight 90 kg 300 kg 405 kg
    Gross Weight (For Shipment) 175 kg 365 kg 475 kg
    Drive Mechanism Ball Screw Ball Screw Ball Screw
    Way System Linear Guide s Linear Guide Linear Guide
    Power Supply 120-240 VAC 50/60 Hz Single Phase,5.5 amps 220-240 VAC 50/60 Hz Single Phase, 15 amps 220-240 VAC 50/60 Hz Single Phase, 15 amps
    Clamp Diameter/Tool Shank 4.0mm 6.0mm 6.0mm
    Materials Zirconia, PMMA, PEEK, Pekkton, Nano-composits, Lava Ultimate, Resin, Wax and more Cr-Co, Ni-Cr, Titanium, Zirconia, PMMA, Glass-ceramics, Lava Ultimate, Resin, Wax and more Cr-Co, Ni-Cr, Titanium, Zirconia, PMMA, Glass-ceramics, Lava Ultimate, Resin, Wax and more.
    Indications Crowns, Copings, Bridges, inlays/onlays, Splints, hybrid abutments, hybrid bars & more. Inlays and Onlays,  Crowns, Copings, Bridges, Custom Abutments & more. Inlays and Onlays,  Crowns, Copings, Bridges, Custom Abutments, Bar Overdentures & more.

    In the News

    Milled Titanium Splinting Offers Superb Fit and Fast Appointment Time In-office laboratory benefits from precision, versatility of Versamill 5X200 Robin D. Henderson, DMD, MS Oklahoma Ctr for Implants & Periodontics READ
    DENTIST USES PREMIUM MACHINERY FOR
    IN-HOUSE LABORATORY
    Ability to mill precision abutments same-day with Versamill 5X helps fulfill mission Khaldoun Attar, DDS Sun Dental & Denture READ
    Mechanical Skills Help Drive Former Racecar Crew Chief's Laboratory Open system, ability to customize are keys when purchasing CAD/CAM equipment John Noel, CDT Noel Laboratories Inc. READ

    Read More
    • Address: 29627 West Tech Dr.
                       Wixom, MI 48393
    • Toll Free: + 1 (855) 687 7941
    • Office: + 1 (248) 926 8810
    • Fax: + 1 (248) 926 9085
    • Email:

    Axsys Dental headquarters
    TrimExpert Announcement
    Axsys Dental Solutions Annouce TrimExpert
    The First Ever Automated Applicance Trimming Solution
    Versamill 5X450
    New Versamill 5X450 Announced
    Axsys Dental Solutions Announces The Immediate Release Of the New Versamill 5X450
    Copyright © 2020 | www.axsysdental.com | Powered by nopCommerce| All rights reserved.
    • Talk with a product specialist for a free, no-obligation consultation.
    • 855-687-7941